Kingston FURY KF432S20IB/8 is a 1G x 64-bit (8GB) DDR4-3200
CL20 SDRAM (Synchronous DRAM) 1Rx8, memory module, based
on eight 1G x 8-bit FBGA components per module. Each module
kit supports Intel® Extreme Memory Profiles (Intel® XMP)
2.0. Each module has been tested to run at DDR4-3200 at a low
latency timing of 20-22-22 at 1.2V. Additional timing parameters
are shown in the Plug-N-Play (PnP) Timing Parameters
section below.
FACTORY TIMING PARAMETERS
• Default (Plug N Play): DDR4-3200 CL20-22-22 @1.2V
• XMP Profile #1: DDR4-3200 CL20-22-22 @1.2V
• XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V
Specification:
CL(IDD): 20 cycles
Row Cycle Time (tRCmin): 45.75ns(min.)
Refresh to Active/Refres Command Time (tRFCmi): 350ns(min.)
Row Active Time (tRASmin): 26.25ns(min.)
UL Rating: 94 V – 0
Operating Temperature: 0°C to +85°C
Storage Temperature: -55°C to +100°C
Features:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.18” (30.00mm)
