KF436C16RBAK2/16 is a kit of two 1G x 64-bit
(8GB) DDR4-3600 CL16 SDRAM (Synchronous DRAM) 1Rx8,
memory module, based on eight 1G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 2.0. Total kit capacity is 16GB. Each
module has been tested to run at DDR4-3600 at a low latency timing
of 16-20-20 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V.
Each 288-pin DIMM uses gold contact fingers.
SPECIFICATIONS
CL(IDD): 17 cycles
Row Cycle Time (tRCmin): 45.75ns(min.)
Refresh to Active/Refresh, Command Time (tRFCmin): 350ns(min.)
Row Active Time (tRASmin): 32ns(min.)
UL Rating: 94 V – 0
Operating Temperature: 0°C to +70°C
Storage Temperature: -40°C to +85°C
FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.66” (42.2mm), w/heatsink
