?Soft & Elegant?: Matte texture with less visible layer lines provides a soft touch and elegance. Macaron colour improves print quality with a higher level of detail. The matte PLA filament for 3D printing was clean on the reel and leaves the spool easily without crossed turns. As a result, there is less thread pulling and twisting, no clogging and no under-extruding.
?PRECISION & EASY REMOVAL OF SUPPORT STRUCTURES?: Anycubic 3D printer PLA filament with a diameter of 1.75mm provides a minimum dimensional tolerance of ±0.03mm, resulting in a smooth filament flow. With a shelf life of 3 years, it has excellent mechanical properties, such as high toughness and low shrinkage, which makes it easier to remove the support structures from printed objects.
?Clog Free & Bubble Free?: Designed and manufactured with the clog free patent to ensure a smooth and stable printing experience with our PLA refills. Fully dried for 24 hours before packaging and vacuum sealed with desiccant in a nylon outer bag, they allow a much smoother and more stable print. The design with larger inner diameter of the spool makes the retraction smoother.
?Eco-friendly & Compatible?: PLA filament made of renewable raw materials, biodegradable, lower melting temperature, no heated bed required. No smell, no pollution, non-toxic when printing. Anycubic PLA filament perfectly compatible with most FDM 3D printers and 3D pens (1.75 mm filament), e.g. ANYCUBIC Kobra series.
Filament installation: 1. Install the spool on the spool holder of a 3D printer and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally and pass it through the extruder and feed hose. 3. Slide the filament manually through the feed hose to the nozzle until the filament melts through the nozzle.
How to replace filaments
1. Install the spool on the spool holder of a 3D printer and heat it in front of the nozzle.
2. Cut the top of the filament into a tower shape and thread it an extruder and feed hose.
3. Manually slide the Pla filament through the feed hose to the nozzle. until the filament melts through the nozzle.
Extra attention required:
When installing and replacing filaments, make sure to heat the print head (heated over 230 °C), otherwise the print head may clog.
Compatibility:
https://m.media-amazon.com/images/S/aplus-media-library-service-media/40795a8c-d5e2-496d-8ed7-0368752d1a15.__CR0,0,300,300_PT0_SX300_V1___.jpg
https://m.media-amazon.com/images/S/aplus-media-library-service-media/47898b3c-0df5-4933-8a9b-ff937d8f90f0.__CR0,0,970,600_PT0_SX970_V1___.jpg
https://m.media-amazon.com/images/S/aplus-media-library-service-media/8548024d-a4da-4688-975a-80b0b0f67832.__CR0,0,970,600_PT0_SX970_V1___.jpg
https://m.media-amazon.com/images/S/aplus-media-library-service-media/71391e3e-3b32-4f69-ba60-6551d3e3dc19.__CR0,0,300,300_PT0_SX300_V1___.jpg
https://m.media-amazon.com/images/S/aplus-media-library-service-media/351b2bff-add6-4727-8a97-957ce722dadb.__CR0,0,300,300_PT
